Boxchive
Free assessment →
Menu

Guide

Digitizing historical documents: a 7-step guide

Digitizing old records goes well when you decide the boring things up front — what you have, what matters most, how files will be named — and badly when you start scanning box one and hope to sort it out later. Here's the order that works for small archives.

Updated

The short version

  1. Inventory what you have, roughly.
  2. Prioritize by what people actually use.
  3. Handle safely — less handling is better.
  4. Capture with equipment that fits the material.
  5. Name files consistently from the first page.
  6. Make the text searchable with OCR and basic details.
  7. Store and back up in at least three places.

1. Inventory what you have

You don't need a finding aid to start, just a list. For each box or series, note what's in it, the rough date range, condition, format (loose sheets, bound volumes, clippings, oversized), and whether it's typed or handwritten. A spreadsheet is fine.

The inventory tells you how big the job is, which equipment you need, and where the hard pages are. It's also exactly what any vendor — or Boxchive — needs to give you an honest estimate.

2. Prioritize by use, not shelf order

Start with records that get asked for:

  • Founding documents, charters, bylaws, deeds.
  • Board and committee minutes.
  • Registers and membership rolls.
  • Whatever supports an upcoming anniversary, exhibit, history, or grant application.

Then add anything visibly deteriorating, so at least an access copy exists.

3. Handle safely

  • Work on a clean, dry, flat surface away from food and drink.
  • Many conservators, including the Library of Congress, advise clean, dry hands rather than cotton gloves for most paper, because gloves reduce dexterity and make tears more likely.
  • Don't force bound volumes flat; support the spine and photograph pages at the angle the binding allows.
  • Don't remove rusted staples or old tape yourself if the paper is brittle — leave it and note it.
  • Fragile and brittle items should never go through a sheet-fed scanner.

4. Capture: scanner, overhead, or phone

MethodGood forAvoid for
Sheet-fed scannerSturdy, loose, standard-size paperAnything fragile, bound, or stapled
Flatbed scannerSingle fragile sheets, photos, clippingsLarge volumes of pages (slow); thick bound books
Overhead / book scannerBound volumes, high volume, preservation workSmall budgets — specialist equipment
Phone cameraBound and fragile items in place; mixed material; no equipment budgetPreservation-grade masters; large-format items

For text documents meant as access copies, 300 dpi is a common minimum. For phone photos, what matters is even light without glare, the camera held parallel to the page, the whole page in frame, and sharp focus. Preservation masters made to standards such as FADGI need specialist equipment.

5. Name files from the first page

Renaming thousands of files later is miserable. Pick a convention — ideally the one your paper files already use — and apply it from day one. A pattern like 1962-03-14_board-minutes_p01 sorts by date and tells you what a file is without opening it. Our file naming guide has rules, examples and a builder.

6. Make the text searchable

An image isn't searchable until OCR turns it into text. Add basic details — date, document type, key names — and the archive answers real questions like "all minutes from the 1970s" or "every letter mentioning the building fund." See what makes an archive searchable.

Handwritten pages are the hard case: standard OCR does little with old cursive. Read handwriting OCR for old records before promising anyone that the registers will be searchable.

7. Store and back up

Follow the 3-2-1 rule: keep three copies, on two different kinds of storage, with one copy off-site. Check the copies periodically — a backup nobody has opened in five years isn't one. Keep the originals; digital copies are for access, and the paper is still the record. Use your retention policy to decide what, if anything, can be destroyed.

Common mistakes

  • Starting capture before deciding on filenames.
  • Scanning to images with no OCR, then wondering why nothing is searchable.
  • Treating handwritten pages as done when nothing could read them.
  • Keeping the only copy on one laptop or one USB drive.
  • Trying to digitize everything before anyone can use anything — finish the high-value series first.

Doing it with Boxchive

Boxchive covers steps 4 through 6 with a phone in place of a scanner: your staff or volunteers photograph the pages, and Boxchive runs OCR, extracts dates and names, classifies each page by document type, files it under your naming convention, and gives you a keyword-searchable archive — flagging handwritten and fragile pages for human review.

Questions people ask

What's the best way to digitize old documents?

Inventory first, digitize the most-requested records first, handle fragile items as little as possible, capture with whatever equipment fits the material (sheet-fed scanner, flatbed, overhead, or phone), name files consistently from day one, run OCR, and keep at least three copies of the results.

What resolution should I scan historical documents at?

300 dpi is a common minimum for text documents used as access copies. Preservation-grade masters follow imaging standards such as FADGI and usually call for specialist equipment.

Can I digitize documents without a scanner?

Yes. A modern phone produces readable, OCR-able images of most pages if you control light, angle and focus. It's also the gentlest option for bound or fragile items, which shouldn't go through a sheet-fed scanner.

Should I throw away the originals after digitizing?

Not historical records. Digital copies are for access; the originals remain the record. Only destroy material your retention policy says can go, and only after confirming the digital copies are complete.

Free digitization assessment

Find out what your archive would actually take.

Tell us about your boxes. We'll come back with a realistic estimate, a sample workflow for your records, and an honest read on whether Boxchive fits — or whether you need a traditional scanning vendor.